Can't program new remotes from wall control panel

  • 1
  • Question
  • Updated 3 months ago
When trying to program remotes using the wall control panels learn button, nothing happens. Remotes will only program using the learn button at the motor.
When the learn button is pressed twice on the control panel, the red LED lights steady, but nothing happens when the remote button is pressed. I would think when it's in the learn mode using the control panel, the motor unit yellow learn LED would light up just like it does when the learn button is pressed at the motor but it does not light up, so I'm guessing the control panel is not putting the motor in the learn mode?

I have a Craftsman 1/2 hp opener bought in 2003. The learn button is either red or orange hard to tell which color it is.

The wall control panel is a 888LM along with the 825LM gateway. Everything works fine with no issues except leaning remotes from the control panel.

Cheers, RG

Photo of Panic Button

Panic Button

  • 1 Post
  • 0 Reply Likes

Posted 3 months ago

  • 1

Be the first to post a reply!